歡迎訪問建豐機械官網

兔燒磚機

您當前所在的位置:首頁 > 産品介紹 > 兔燒磚機
QT10-15 全自動砌塊成型機


QT10-15 全自動砌塊成型機

QT10-15 Fully-automatic Concrete Block Making Machine

技術參數:

Technical Data

托板規格(mmPallet Sizemm

1080x850x20

整機重量(kgMachine Weightkg

12000kg

振動方式 The Way of Vibration

台模合振Table Mould Vibration

振動頻率 The Frequency of Vibrate

2800~4200rpm

成型周期(sCircle times

15~20s

額定功率(kwRated Powerkw

36kw

 

生産效率

Production Capacity

産品規格

Specification of Production

每塊板數

Blocks/Mould

/小時

Pcs/1 hour

/8小時

Pcs/8 hours

/300天(一班)

Pcs/300days(1 shift)

砌塊

Blocks

 

390x190x190mm

10

2,400

19,200

5,760,000

多孔磚

Perforate Bricks

 

240x115x90mm

24

5,760

46,080

13,824,000

鋪地磚

Paving Bricks

 

200x100x60mm

36

8,640

69,120

20,736,000

標磚

Standard Bricks

 

240x115x53mm

48

11,520

92,160

27,648,000

 

 

 

 

産品說明

1.電器系統采用日本松下觸摸屏和可編程控制器PLC,配備數據輸入輸出裝置,控制系統包括安全邏輯控制及故障診斷系統。

2. 液壓元件,采用高動態比例閥,可根據不同的工作要求調節油量和壓力,以控制關鍵部件的動作。

3. 機體采用高強度鑄件及特殊材料焊接制造,鋼性好,耐振,壽命長。

4. 該機采用四杆導向方式,保證了壓頭及模具的准確運行。

5. 該機利用台面振動加壓成型,成型周期短、生産效率高、砌塊質量密實強度高、尺寸准確。

6. 機、電、液一體化結合技術,使設備運轉的每一個循環一致,因而成型産品穩定,廢品率低。

7. 一機多用通過更換模具可生産不同規格多孔磚、空心砌塊、實心砌塊、路沿石、路面磚以及植草磚、護坡磚等水泥制品。

Introduction

1. The electrical control system of whole machine is equipped with PLC system, operated in graphical interfaces, which can realize random signal analysis, failure diagnosis and the parameters setting, guarantee the best running of machine.
2. Material storing & distributing unit: Adopt close type belt conveyer, which controls the amount of material of hopper strictly, make sure the material used at the instant when being conveyed, prevent the concrete from fluidify in advance owing to the influence of aftershocks, guarantee products shaping smoothly and product quality.
3. Advanced material-feeding technology: Compulsive, rapidly and smoothly material-feeding.
4. Unique and effective mode of vibration: Equipped with frequency converter to control and adjust the speed of electric motor, to meet and guarantee the demand of various vibration frequency and swing for material-feeding and vibration molding accordingly, improve the quality of products and shorten the molding cycle.
5. Reasonable vibration distribution: Mold box is locked into vibration table which with good rigidity, vibration table and mould vibrate synchronistically and make the amplitude distributed evenly, as a result the intensity deviation of products made from one mould will be smaller.
6. Novelty, firmly in structure: The machine is manufactured by adopting ultrahigh

Intensity steel, whole structure is with the characteristics of easy to maintain and to be wearable.

7. The machine is compact in structure, stable in performance, convenient to operate and maintain. The investment of this project occupies small land, with little investment but benefit is high, suitable for large, medium or small building materials enterprise to invest.

 

mouC5yYwn77Cd6iUfJewF1Qig+qRWCPbS2yXfo2k1sbeRitlOHm4sFbDJPB5/FnZM6Hiq4ndLfiJLyOcBP9x2oXayJYrw9pl6afJBagImEo6X822UjS/aYC89jAJgrXd3gdMvsTB5whyE/akg/bSWg==